2020-08-13 10:09:50 [信息] Device Loading!
2020-08-13 10:10:57 [调试] 创建驱动(130)成功!
2020-08-13 10:10:59 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tlclient-1/libDRCurrencyITL.so,/dev/ttyS1,9600)=30005,/dev/ttyS1未检测到识币器！Code=31008,Read data timeout!
2020-08-13 10:10:59 [调试] 创建驱动(220)成功!
2020-08-13 10:10:59 [信息] OpenDevice(220,/data/app-lib/com.jsscom.tlclient-1/libDRReaderQRCode.so,/dev/ttyUSB0,115200)=30001,打开串口[/dev/ttyUSB0,115200]失败!
2020-08-13 10:10:59 [调试] 创建驱动(100)成功!
2020-08-13 10:10:59 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS0,9600)=0,打开端口(/dev/ttyS0,9600)成功!
2020-08-13 10:11:00 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 10:11:01 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 10:11:01 [调试] 创建驱动(110)成功!
2020-08-13 10:11:01 [信息] OpenDevice(110,/data/app-lib/com.jsscom.tlclient-1/,,)=31005,Load /data/app-lib/com.jsscom.tlclient-1/ error!,dlopen failed: can't read file "/data/app-lib/com.jsscom.tlclient-1/": Is a directory
2020-08-13 10:11:02 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS0,9600)=0,端口已打开
2020-08-13 10:11:02 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tlclient-1/libDRCurrencyITL.so,/dev/ttyS1,9600)=0,端口已经打开!
2020-08-13 10:11:02 [调试] 创建驱动(910)成功!
2020-08-13 10:11:02 [信息] OpenDevice(910,/data/app-lib/com.jsscom.tlclient-1/libDRSQLite.so,/mnt/internal_sd/tl//data/js_tl.db,)=0,openDB=0
2020-08-13 10:15:04 [信息] Device Loading!
2020-08-13 10:15:21 [调试] 创建驱动(130)成功!
2020-08-13 10:15:12 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tlclient-1/libDRCurrencyITL.so,/dev/ttyS1,9600)=30005,/dev/ttyS1未检测到识币器！Code=31008,Read data timeout!
2020-08-13 10:15:12 [调试] 创建驱动(220)成功!
2020-08-13 10:15:12 [信息] OpenDevice(220,/data/app-lib/com.jsscom.tlclient-1/libDRReaderQRCode.so,/dev/ttyUSB0,115200)=30001,打开串口[/dev/ttyUSB0,115200]失败!
2020-08-13 10:15:12 [调试] 创建驱动(100)成功!
2020-08-13 10:15:12 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS0,9600)=0,打开端口(/dev/ttyS0,9600)成功!
2020-08-13 10:15:13 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 10:15:14 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 10:15:14 [调试] 创建驱动(110)成功!
2020-08-13 10:15:14 [信息] OpenDevice(110,/data/app-lib/com.jsscom.tlclient-1/,,)=31005,Load /data/app-lib/com.jsscom.tlclient-1/ error!,dlopen failed: can't read file "/data/app-lib/com.jsscom.tlclient-1/": Is a directory
2020-08-13 10:15:16 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS0,9600)=0,端口已打开
2020-08-13 10:15:16 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tlclient-1/libDRCurrencyITL.so,/dev/ttyS1,9600)=0,端口已经打开!
2020-08-13 10:15:16 [调试] 创建驱动(910)成功!
2020-08-13 10:15:16 [信息] OpenDevice(910,/data/app-lib/com.jsscom.tlclient-1/libDRSQLite.so,/mnt/internal_sd/tl//data/js_tl.db,)=0,openDB=0
2020-08-13 10:15:28 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS0,9600)=0,端口已打开
2020-08-13 10:15:29 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 10:42:53 [信息] Device Loading!
2020-08-13 10:46:53 [信息] Device Loading!
2020-08-13 11:17:57 [信息] Device Loading!
2020-08-13 11:18:24 [调试] 创建驱动(130)成功!
2020-08-13 11:18:26 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tlclient-1/libDRCurrencyITL.so,/dev/ttyS1,9600)=30005,/dev/ttyS1未检测到识币器！Code=31008,Read data timeout!
2020-08-13 11:18:26 [调试] 创建驱动(220)成功!
2020-08-13 11:18:26 [信息] OpenDevice(220,/data/app-lib/com.jsscom.tlclient-1/libDRReaderQRCode.so,/dev/ttyUSB0,115200)=30001,打开串口[/dev/ttyUSB0,115200]失败!
2020-08-13 11:18:26 [调试] 创建驱动(100)成功!
2020-08-13 11:18:26 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS0,9600)=0,打开端口(/dev/ttyS0,9600)成功!
2020-08-13 11:18:27 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 11:18:28 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 11:18:28 [调试] 创建驱动(110)成功!
2020-08-13 11:18:28 [信息] OpenDevice(110,/data/app-lib/com.jsscom.tlclient-1/,,)=31005,Load /data/app-lib/com.jsscom.tlclient-1/ error!,dlopen failed: can't read file "/data/app-lib/com.jsscom.tlclient-1/": Is a directory
2020-08-13 11:18:31 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS0,9600)=0,端口已打开
2020-08-13 11:18:31 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tlclient-1/libDRCurrencyITL.so,/dev/ttyS1,9600)=0,端口已经打开!
2020-08-13 11:18:31 [调试] 创建驱动(910)成功!
2020-08-13 11:18:31 [信息] OpenDevice(910,/data/app-lib/com.jsscom.tlclient-1/libDRSQLite.so,/mnt/internal_sd/tl//data/js_tl.db,)=0,openDB=0
2020-08-13 15:50:11 [信息] Device Loading!
2020-08-13 15:50:23 [调试] 创建驱动(130)成功!
2020-08-13 15:50:24 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tlclient-1/libDRCurrencyITL.so,/dev/ttyS1,9600)=30005,/dev/ttyS1未检测到识币器！Code=31008,Read data timeout!
2020-08-13 15:50:24 [调试] 创建驱动(220)成功!
2020-08-13 15:50:24 [信息] OpenDevice(220,/data/app-lib/com.jsscom.tlclient-1/libDRReaderQRCode.so,/dev/ttyUSB0,115200)=30001,打开串口[/dev/ttyUSB0,115200]失败!
2020-08-13 15:50:24 [调试] 创建驱动(100)成功!
2020-08-13 15:50:24 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS0,9600)=0,打开端口(/dev/ttyS0,9600)成功!
2020-08-13 15:50:25 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 15:50:26 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 15:50:27 [调试] 创建驱动(110)成功!
2020-08-13 15:50:27 [信息] OpenDevice(110,/data/app-lib/com.jsscom.tlclient-1/,,)=31005,Load /data/app-lib/com.jsscom.tlclient-1/ error!,dlopen failed: can't read file "/data/app-lib/com.jsscom.tlclient-1/": Is a directory
2020-08-13 15:50:28 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS0,9600)=0,端口已打开
2020-08-13 15:50:28 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tlclient-1/libDRCurrencyITL.so,/dev/ttyS1,9600)=0,端口已经打开!
2020-08-13 15:50:28 [调试] 创建驱动(910)成功!
2020-08-13 15:50:28 [信息] OpenDevice(910,/data/app-lib/com.jsscom.tlclient-1/libDRSQLite.so,/mnt/internal_sd/tl//data/js_tl.db,)=0,openDB=0
2020-08-13 15:50:36 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS0,9600)=0,端口已打开
2020-08-13 15:50:37 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 15:50:47 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 15:50:48 [信息] CloseDevice(130)=0,Read data timeout!
2020-08-13 15:54:39 [信息] Device Loading!
2020-08-13 15:55:59 [调试] 创建驱动(130)成功!
2020-08-13 15:56:00 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tlclient-1/libDRCurrencyITL.so,/dev/ttyS1,9600)=30005,/dev/ttyS1未检测到识币器！Code=31008,Read data timeout!
2020-08-13 15:56:00 [调试] 创建驱动(220)成功!
2020-08-13 15:56:00 [信息] OpenDevice(220,/data/app-lib/com.jsscom.tlclient-1/libDRReaderQRCode.so,/dev/ttyUSB0,115200)=30001,打开串口[/dev/ttyUSB0,115200]失败!
2020-08-13 15:56:00 [调试] 创建驱动(100)成功!
2020-08-13 15:56:00 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS0,9600)=0,打开端口(/dev/ttyS0,9600)成功!
2020-08-13 15:56:01 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 15:56:02 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 15:56:02 [调试] 创建驱动(110)成功!
2020-08-13 15:56:02 [信息] OpenDevice(110,/data/app-lib/com.jsscom.tlclient-1/,,)=31005,Load /data/app-lib/com.jsscom.tlclient-1/ error!,dlopen failed: can't read file "/data/app-lib/com.jsscom.tlclient-1/": Is a directory
2020-08-13 15:56:04 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS0,9600)=0,端口已打开
2020-08-13 15:56:04 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tlclient-1/libDRCurrencyITL.so,/dev/ttyS1,9600)=0,端口已经打开!
2020-08-13 15:56:04 [调试] 创建驱动(910)成功!
2020-08-13 15:56:04 [信息] OpenDevice(910,/data/app-lib/com.jsscom.tlclient-1/libDRSQLite.so,/mnt/internal_sd/tl//data/js_tl.db,)=0,openDB=0
2020-08-13 16:00:14 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 16:00:15 [信息] CloseDevice(130)=0,Read data timeout!
2020-08-13 16:00:16 [信息] Device Loading!
2020-08-13 16:00:43 [调试] 创建驱动(100)成功!
2020-08-13 16:00:43 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS0,9600)=0,打开端口(/dev/ttyS0,9600)成功!
2020-08-13 16:00:47 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 16:00:55 [信息] Device Loading!
2020-08-13 16:00:58 [调试] 创建驱动(100)成功!
2020-08-13 16:00:58 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS3,9600)=30001,打开端口(/dev/ttyS3,9600)失败!
2020-08-13 16:01:00 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS3,9600)=30001,打开端口(/dev/ttyS3,9600)失败!
2020-08-13 16:01:10 [信息] Device Loading!
2020-08-13 16:01:12 [调试] 创建驱动(100)成功!
2020-08-13 16:01:12 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 16:01:15 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:01:15 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:01:18 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 16:01:19 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 16:01:20 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 16:01:22 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 16:01:23 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 16:01:23 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 16:01:25 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 16:01:26 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 16:01:27 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 16:01:29 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 16:01:30 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 16:01:31 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:01:31 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:01:33 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:01:33 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:01:34 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 16:02:00 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS0,9600)=0,打开端口(/dev/ttyS0,9600)成功!
2020-08-13 16:02:03 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 16:02:05 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 16:02:06 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 16:02:06 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 16:02:07 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS0,9600)=0,打开端口(/dev/ttyS0,9600)成功!
2020-08-13 16:02:07 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS0,9600)=0,端口已打开
2020-08-13 16:02:09 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:02:09 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:02:16 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:02:16 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:02:17 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 16:02:18 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS0,9600)=0,打开端口(/dev/ttyS0,9600)成功!
2020-08-13 16:02:22 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:02:22 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:02:55 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 16:04:31 [信息] Device Loading!
2020-08-13 16:04:47 [调试] 创建驱动(130)成功!
2020-08-13 16:04:38 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tlclient-1/libDRCurrencyITL.so,/dev/ttyS1,9600)=30005,/dev/ttyS1未检测到识币器！Code=31008,Read data timeout!
2020-08-13 16:04:38 [调试] 创建驱动(220)成功!
2020-08-13 16:04:38 [信息] OpenDevice(220,/data/app-lib/com.jsscom.tlclient-1/libDRReaderQRCode.so,/dev/ttyUSB0,115200)=30001,打开串口[/dev/ttyUSB0,115200]失败!
2020-08-13 16:04:38 [调试] 创建驱动(100)成功!
2020-08-13 16:04:38 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS0,9600)=0,打开端口(/dev/ttyS0,9600)成功!
2020-08-13 16:04:39 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 16:04:40 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 16:04:40 [调试] 创建驱动(110)成功!
2020-08-13 16:04:40 [信息] OpenDevice(110,/data/app-lib/com.jsscom.tlclient-1/,,)=31005,Load /data/app-lib/com.jsscom.tlclient-1/ error!,dlopen failed: can't read file "/data/app-lib/com.jsscom.tlclient-1/": Is a directory
2020-08-13 16:04:41 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS0,9600)=0,端口已打开
2020-08-13 16:04:41 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tlclient-1/libDRCurrencyITL.so,/dev/ttyS1,9600)=0,端口已经打开!
2020-08-13 16:04:41 [调试] 创建驱动(910)成功!
2020-08-13 16:04:41 [信息] OpenDevice(910,/data/app-lib/com.jsscom.tlclient-1/libDRSQLite.so,/mnt/internal_sd/tl//data/js_tl.db,)=0,openDB=0
2020-08-13 16:06:44 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS0,9600)=0,端口已打开
2020-08-13 16:06:45 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 16:06:54 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 16:06:55 [信息] CloseDevice(130)=0,Read data timeout!
2020-08-13 16:06:55 [信息] Device Loading!
2020-08-13 16:07:02 [调试] 创建驱动(100)成功!
2020-08-13 16:07:02 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS0,9600)=0,打开端口(/dev/ttyS0,9600)成功!
2020-08-13 16:07:06 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 16:07:08 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:07:08 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:07:10 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:07:10 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:07:12 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:07:13 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:07:14 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:07:15 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:07:16 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:07:17 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:07:18 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS0,9600)=0,端口已打开
2020-08-13 16:07:18 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS0,9600)=0,端口已打开
2020-08-13 16:07:18 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS0,9600)=0,端口已打开
2020-08-13 16:07:18 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS0,9600)=0,端口已打开
2020-08-13 16:07:21 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 16:07:23 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:07:23 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:07:31 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 16:07:33 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 16:07:34 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 16:07:36 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 16:07:38 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:07:38 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:09:23 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 16:09:25 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 16:09:25 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 16:09:29 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:09:29 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:09:31 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:09:31 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:09:33 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:09:33 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:09:35 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:09:35 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:09:36 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 16:09:43 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 16:09:44 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 16:09:45 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 16:09:48 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:09:48 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:09:51 [信息] Device Loading!
2020-08-13 16:09:55 [调试] 创建驱动(100)成功!
2020-08-13 16:09:55 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 16:10:01 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:10:01 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:10:03 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:10:03 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:10:05 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:10:05 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:10:07 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:10:07 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:10:09 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:10:09 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:10:11 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:10:11 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:10:21 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 16:10:25 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:10:25 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:10:27 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:10:27 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:10:29 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:10:29 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:10:31 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:10:31 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:10:33 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:10:33 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:10:35 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:10:35 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:10:37 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:10:37 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:10:39 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:10:39 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:10:41 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:10:41 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:10:43 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:10:43 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:10:45 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:10:45 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:10:47 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:10:47 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:10:49 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:10:49 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:10:51 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:10:51 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:10:53 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:10:53 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:10:55 [信息] Device Loading!
2020-08-13 16:11:07 [调试] 创建驱动(100)成功!
2020-08-13 16:11:07 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS0,9600)=0,打开端口(/dev/ttyS0,9600)成功!
2020-08-13 16:11:20 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 16:11:20 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS0,9600)=0,打开端口(/dev/ttyS0,9600)成功!
2020-08-13 16:11:23 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 16:11:28 [信息] Device Loading!
2020-08-13 16:11:30 [调试] 创建驱动(100)成功!
2020-08-13 16:11:30 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS0,9600)=0,打开端口(/dev/ttyS0,9600)成功!
2020-08-13 16:11:34 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 16:11:36 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:11:37 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:11:40 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 16:11:41 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS0,9600)=0,打开端口(/dev/ttyS0,9600)成功!
2020-08-13 16:11:43 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:11:43 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:11:45 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:11:45 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:11:47 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:11:47 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:11:49 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:11:49 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:11:51 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:11:51 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:11:53 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:11:53 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:11:55 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:11:55 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:11:57 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:11:57 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:12:13 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 16:12:14 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS0,9600)=0,打开端口(/dev/ttyS0,9600)成功!
2020-08-13 16:12:19 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:12:19 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:12:21 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:12:21 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:12:23 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:12:23 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:12:25 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:12:25 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:12:27 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:12:27 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:12:29 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:12:29 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:12:31 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:12:31 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:12:33 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:12:33 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:12:35 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:12:35 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:12:37 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:12:37 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:13:09 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 16:13:10 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 16:13:10 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 16:13:12 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:13:12 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:13:14 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:13:14 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:13:16 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:13:16 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:13:17 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 16:13:18 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 16:13:20 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 16:13:32 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 16:13:33 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 16:13:38 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:13:38 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:21:41 [信息] Device Loading!
2020-08-13 16:21:50 [调试] 创建驱动(130)成功!
2020-08-13 16:21:51 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tlclient-1/libDRCurrencyITL.so,/dev/ttyS1,9600)=30005,/dev/ttyS1未检测到识币器！Code=31008,Read data timeout!
2020-08-13 16:21:51 [调试] 创建驱动(220)成功!
2020-08-13 16:21:52 [信息] OpenDevice(220,/data/app-lib/com.jsscom.tlclient-1/libDRReaderQRCode.so,/dev/ttyUSB0,115200)=30001,打开串口[/dev/ttyUSB0,115200]失败!
2020-08-13 16:21:52 [调试] 创建驱动(100)成功!
2020-08-13 16:21:52 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 16:21:53 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 16:21:54 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 16:21:54 [调试] 创建驱动(110)成功!
2020-08-13 16:21:54 [信息] OpenDevice(110,/data/app-lib/com.jsscom.tlclient-1/,,)=31005,Load /data/app-lib/com.jsscom.tlclient-1/ error!,dlopen failed: can't read file "/data/app-lib/com.jsscom.tlclient-1/": Is a directory
2020-08-13 16:21:55 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 16:21:55 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tlclient-1/libDRCurrencyITL.so,/dev/ttyS1,9600)=0,端口已经打开!
2020-08-13 16:21:55 [调试] 创建驱动(910)成功!
2020-08-13 16:21:55 [信息] OpenDevice(910,/data/app-lib/com.jsscom.tlclient-1/libDRSQLite.so,/mnt/internal_sd/tl//data/js_tl.db,)=0,openDB=0
2020-08-13 16:22:10 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 16:22:11 [信息] CloseDevice(130)=0,Read data timeout!
2020-08-13 16:22:11 [信息] Device Loading!
2020-08-13 16:22:17 [调试] 创建驱动(100)成功!
2020-08-13 16:22:17 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 16:22:19 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 16:22:20 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 16:22:21 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 16:22:22 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 16:22:24 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:22:24 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:22:26 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:22:26 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:22:34 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS0,9600)=0,端口已打开
2020-08-13 16:22:36 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:22:37 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:22:38 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:22:39 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:22:43 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:22:43 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:22:45 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:22:45 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:22:47 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:22:47 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:22:49 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:22:49 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:22:51 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:22:51 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:23:02 [信息] Device Loading!
2020-08-13 16:23:09 [调试] 创建驱动(100)成功!
2020-08-13 16:23:09 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS0,9600)=0,打开端口(/dev/ttyS0,9600)成功!
2020-08-13 16:23:12 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:23:12 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:23:14 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:23:14 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:23:16 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:23:16 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:23:18 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:23:18 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:23:20 [信息] Device Loading!
2020-08-13 16:23:39 [调试] 创建驱动(100)成功!
2020-08-13 16:23:39 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 16:23:41 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:23:41 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:23:43 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:23:43 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:23:45 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:23:45 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:23:47 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:23:47 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:23:49 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:23:49 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:23:51 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:23:51 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:23:53 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:23:53 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:23:56 [信息] Device Loading!
2020-08-13 16:24:01 [调试] 创建驱动(130)成功!
2020-08-13 16:24:03 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tianlingtest-2/libDRCurrencyBTC.so,/dev/ttyS1,9600)=0,打开[/dev/ttyS1,9600]成功,设备复位失败
2020-08-13 16:24:03 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tianlingtest-2/libDRCurrencyBTC.so,/dev/ttyS1,9600)=0,设备端口已打开
2020-08-13 16:24:03 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tianlingtest-2/libDRCurrencyBTC.so,/dev/ttyS1,9600)=0,设备端口已打开
2020-08-13 16:24:06 [错误] GetDeviceStatus(130)=30003,msg=设备无响应
2020-08-13 16:24:08 [错误] GetDeviceStatus(130)=30003,msg=设备无响应
2020-08-13 16:24:10 [错误] GetDeviceStatus(130)=30003,msg=设备无响应
2020-08-13 16:24:12 [错误] GetDeviceStatus(130)=30003,msg=设备无响应
2020-08-13 16:24:14 [错误] GetDeviceStatus(130)=30003,msg=设备无响应
2020-08-13 16:24:15 [信息] Device Loading!
2020-08-13 16:24:22 [调试] 创建驱动(130)成功!
2020-08-13 16:24:24 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tianlingtest-2/libDRCurrencyBTC.so,/dev/ttyS0,9600)=0,打开[/dev/ttyS0,9600]成功,设备复位失败
2020-08-13 16:24:24 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tianlingtest-2/libDRCurrencyBTC.so,/dev/ttyS0,9600)=0,设备端口已打开
2020-08-13 16:24:24 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tianlingtest-2/libDRCurrencyBTC.so,/dev/ttyS0,9600)=0,设备端口已打开
2020-08-13 16:24:28 [错误] GetDeviceStatus(130)=30003,msg=设备无响应
2020-08-13 16:24:30 [信息] CloseDevice(130)=0,设备端口已关闭
2020-08-13 16:24:30 [信息] CloseDevice(130)=31003,驱动未加载
2020-08-13 16:24:34 [信息] CloseDevice(130)=31003,驱动未加载
2020-08-13 16:24:41 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tianlingtest-2/libDRCurrencyBTC.so,/dev/ttyS3,9600)=30001,打开端口[/dev/ttyS3,9600]失败
2020-08-13 16:24:43 [错误] GetDeviceStatus(130)=30004,msg=端口未打开
2020-08-13 16:24:45 [信息] CloseDevice(130)=0,设备端口已关闭
2020-08-13 16:24:51 [信息] CloseDevice(130)=31003,驱动未加载
2020-08-13 16:24:51 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tianlingtest-2/libDRCurrencyBTC.so,/dev/ttyS2,9600)=30001,打开端口[/dev/ttyS2,9600]失败
2020-08-13 16:24:58 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tianlingtest-2/libDRCurrencyBTC.so,/dev/ttyS1,9600)=0,打开[/dev/ttyS1,9600]成功,设备复位失败
2020-08-13 16:24:58 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tianlingtest-2/libDRCurrencyBTC.so,/dev/ttyS1,9600)=0,设备端口已打开
2020-08-13 16:24:58 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tianlingtest-2/libDRCurrencyBTC.so,/dev/ttyS1,9600)=0,设备端口已打开
2020-08-13 16:24:58 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tianlingtest-2/libDRCurrencyBTC.so,/dev/ttyS1,9600)=0,设备端口已打开
2020-08-13 16:25:01 [信息] CloseDevice(130)=0,设备端口已关闭
2020-08-13 16:25:01 [信息] CloseDevice(130)=31003,驱动未加载
2020-08-13 16:25:04 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tianlingtest-2/libDRCurrencyBTC.so,/dev/ttyS1,9600)=0,打开[/dev/ttyS1,9600]成功,设备复位失败
2020-08-13 16:25:04 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tianlingtest-2/libDRCurrencyBTC.so,/dev/ttyS1,9600)=0,设备端口已打开
2020-08-13 16:25:07 [错误] GetDeviceStatus(130)=30003,msg=设备无响应
2020-08-13 16:25:09 [错误] GetDeviceStatus(130)=30003,msg=设备无响应
2020-08-13 16:25:11 [错误] GetDeviceStatus(130)=30003,msg=设备无响应
2020-08-13 16:25:13 [错误] GetDeviceStatus(130)=30003,msg=设备无响应
2020-08-13 16:25:15 [错误] GetDeviceStatus(130)=30003,msg=设备无响应
2020-08-13 16:25:16 [调试] CashEnable(130,NO=120000001,userNo,60)=30003
2020-08-13 16:25:22 [信息] CloseDevice(130)=0,设备端口已关闭
2020-08-13 16:25:22 [信息] CloseDevice(130)=31003,驱动未加载
2020-08-13 16:25:22 [信息] CloseDevice(130)=31003,驱动未加载
2020-08-13 16:25:24 [调试] 创建驱动(100)成功!
2020-08-13 16:25:24 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 16:25:27 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:25:27 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:25:29 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:25:29 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:25:31 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:25:31 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:25:33 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:25:33 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:25:35 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:25:35 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:25:37 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:25:37 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:25:39 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:25:39 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:25:41 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:25:41 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:27:32 [信息] Device Loading!
2020-08-13 16:27:50 [信息] Device Loading!
2020-08-13 16:28:01 [调试] 创建驱动(130)成功!
2020-08-13 16:28:02 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tianlingtest-2/libDRCurrencyITL.so,/dev/ttyS1,9600)=30005,/dev/ttyS1未检测到识币器！Code=31008,Read data timeout!
2020-08-13 16:28:02 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tianlingtest-2/libDRCurrencyITL.so,/dev/ttyS1,9600)=0,端口已经打开!
2020-08-13 16:28:09 [信息] CloseDevice(130)=0,Read data timeout!
2020-08-13 16:28:09 [信息] CloseDevice(130)=31003,驱动未加载
2020-08-13 16:28:09 [信息] CloseDevice(130)=31003,驱动未加载
2020-08-13 16:28:09 [信息] CloseDevice(130)=31003,驱动未加载
2020-08-13 16:28:11 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tianlingtest-2/libDRCurrencyITL.so,/dev/ttyS0,9600)=30005,/dev/ttyS0未检测到识币器！Code=31008,Read data timeout!
2020-08-13 16:28:12 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tianlingtest-2/libDRCurrencyITL.so,/dev/ttyS0,9600)=0,端口已经打开!
2020-08-13 16:28:15 [错误] GetDeviceStatus(130)=31008,msg=Read data timeout!
2020-08-13 16:28:17 [错误] GetDeviceStatus(130)=31008,msg=Read data timeout!
2020-08-13 16:28:20 [信息] CloseDevice(130)=0,Read data timeout!
2020-08-13 16:28:20 [信息] CloseDevice(130)=31003,驱动未加载
2020-08-13 16:28:20 [信息] CloseDevice(130)=31003,驱动未加载
2020-08-13 16:28:25 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tianlingtest-2/libDRCurrencyITL.so,/dev/ttyS1,9600)=30005,/dev/ttyS1未检测到识币器！Code=31008,Read data timeout!
2020-08-13 16:28:25 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tianlingtest-2/libDRCurrencyITL.so,/dev/ttyS1,9600)=0,端口已经打开!
2020-08-13 16:28:28 [错误] GetDeviceStatus(130)=31008,msg=Read data timeout!
2020-08-13 16:28:30 [错误] GetDeviceStatus(130)=31008,msg=Read data timeout!
2020-08-13 16:28:32 [信息] Device Loading!
2020-08-13 16:28:37 [调试] 创建驱动(130)成功!
2020-08-13 16:28:38 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tianlingtest-2/libDRCurrencyITL.so,/dev/ttyS1,9600)=30005,/dev/ttyS1未检测到识币器！Code=31008,Read data timeout!
2020-08-13 16:28:38 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tianlingtest-2/libDRCurrencyITL.so,/dev/ttyS1,9600)=0,端口已经打开!
2020-08-13 16:28:41 [错误] GetDeviceStatus(130)=31008,msg=Read data timeout!
2020-08-13 16:28:43 [错误] GetDeviceStatus(130)=31008,msg=Read data timeout!
2020-08-13 16:28:45 [错误] GetDeviceStatus(130)=31008,msg=Read data timeout!
2020-08-13 16:28:48 [错误] GetDeviceStatus(130)=31008,msg=Read data timeout!
2020-08-13 16:28:50 [错误] GetDeviceStatus(130)=31008,msg=Read data timeout!
2020-08-13 16:28:52 [错误] GetDeviceStatus(130)=31008,msg=Read data timeout!
2020-08-13 16:28:54 [错误] GetDeviceStatus(130)=31008,msg=Read data timeout!
2020-08-13 16:28:55 [信息] CloseDevice(130)=0,Read data timeout!
2020-08-13 16:28:55 [信息] CloseDevice(130)=31003,驱动未加载
2020-08-13 16:28:55 [信息] CloseDevice(130)=31003,驱动未加载
2020-08-13 16:28:55 [信息] CloseDevice(130)=31003,驱动未加载
2020-08-13 16:28:55 [信息] CloseDevice(130)=31003,驱动未加载
2020-08-13 16:28:56 [信息] CloseDevice(130)=31003,驱动未加载
2020-08-13 16:28:56 [信息] CloseDevice(130)=31003,驱动未加载
2020-08-13 16:28:56 [信息] CloseDevice(130)=31003,驱动未加载
2020-08-13 16:28:56 [信息] CloseDevice(130)=31003,驱动未加载
2020-08-13 16:28:56 [信息] CloseDevice(130)=31003,驱动未加载
2020-08-13 16:28:56 [信息] CloseDevice(130)=31003,驱动未加载
2020-08-13 16:28:56 [信息] CloseDevice(130)=31003,驱动未加载
2020-08-13 16:28:56 [信息] CloseDevice(130)=31003,驱动未加载
2020-08-13 16:28:56 [信息] CloseDevice(130)=31003,驱动未加载
2020-08-13 16:28:56 [信息] CloseDevice(130)=31003,驱动未加载
2020-08-13 16:28:56 [信息] CloseDevice(130)=31003,驱动未加载
2020-08-13 16:28:56 [信息] CloseDevice(130)=31003,驱动未加载
2020-08-13 16:28:56 [信息] CloseDevice(130)=31003,驱动未加载
2020-08-13 16:28:56 [信息] CloseDevice(130)=31003,驱动未加载
2020-08-13 16:28:56 [信息] CloseDevice(130)=31003,驱动未加载
2020-08-13 16:29:05 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tianlingtest-2/libDRCurrencyITL.so,/dev/ttyS0,9600)=30005,/dev/ttyS0未检测到识币器！Code=31008,Read data timeout!
2020-08-13 16:33:33 [信息] Device Loading!
2020-08-13 16:33:40 [调试] 创建驱动(130)成功!
2020-08-13 16:33:41 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tlclient-1/libDRCurrencyITL.so,/dev/ttyS0,9600)=30005,/dev/ttyS0未检测到识币器！Code=31008,Read data timeout!
2020-08-13 16:33:41 [调试] 创建驱动(220)成功!
2020-08-13 16:33:41 [信息] OpenDevice(220,/data/app-lib/com.jsscom.tlclient-1/libDRReaderQRCode.so,/dev/ttyUSB0,115200)=30001,打开串口[/dev/ttyUSB0,115200]失败!
2020-08-13 16:33:41 [调试] 创建驱动(100)成功!
2020-08-13 16:33:41 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 16:33:43 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 16:33:44 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 16:33:44 [调试] 创建驱动(110)成功!
2020-08-13 16:33:44 [信息] OpenDevice(110,/data/app-lib/com.jsscom.tlclient-1/,,)=31005,Load /data/app-lib/com.jsscom.tlclient-1/ error!,dlopen failed: can't read file "/data/app-lib/com.jsscom.tlclient-1/": Is a directory
2020-08-13 16:33:45 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 16:33:45 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tlclient-1/libDRCurrencyITL.so,/dev/ttyS0,9600)=0,端口已经打开!
2020-08-13 16:33:45 [调试] 创建驱动(910)成功!
2020-08-13 16:33:45 [信息] OpenDevice(910,/data/app-lib/com.jsscom.tlclient-1/libDRSQLite.so,/mnt/internal_sd/tl//data/js_tl.db,)=0,openDB=0
2020-08-13 16:34:20 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 16:34:22 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 16:34:32 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 16:34:33 [信息] CloseDevice(130)=0,Read data timeout!
2020-08-13 16:34:34 [信息] Device Loading!
2020-08-13 16:35:06 [调试] 创建驱动(100)成功!
2020-08-13 16:35:06 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS0,9600)=0,打开端口(/dev/ttyS0,9600)成功!
2020-08-13 16:35:09 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:35:10 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:35:11 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:35:12 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:35:13 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:35:14 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:35:15 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:35:16 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:35:17 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:35:18 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:35:19 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:35:20 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:35:21 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:35:22 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:35:23 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:35:24 [信息] RPCutPaper(100,0)=30002,msg=
2020-08-13 16:35:25 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:35:25 [信息] RPCutPaper(100,0)=30002,msg=
2020-08-13 16:35:26 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:35:26 [信息] RPCutPaper(100,0)=30002,msg=
2020-08-13 16:35:28 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:35:28 [信息] RPCutPaper(100,0)=30002,msg=
2020-08-13 16:35:29 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:35:29 [信息] RPCutPaper(100,0)=30002,msg=
2020-08-13 16:35:30 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:35:30 [信息] RPCutPaper(100,0)=30002,msg=
2020-08-13 16:35:32 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:35:32 [信息] RPCutPaper(100,0)=30002,msg=
2020-08-13 16:35:33 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:35:33 [信息] RPCutPaper(100,0)=30002,msg=
2020-08-13 16:35:34 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:35:34 [信息] RPCutPaper(100,0)=30002,msg=
2020-08-13 16:36:01 [信息] Device Loading!
2020-08-13 16:36:06 [调试] 创建驱动(100)成功!
2020-08-13 16:36:06 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS0,9600)=0,打开端口(/dev/ttyS0,9600)成功!
2020-08-13 16:36:09 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:36:09 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:36:13 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:36:13 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:36:15 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:36:15 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:36:48 [信息] Device Loading!
2020-08-13 16:40:19 [调试] 创建驱动(100)成功!
2020-08-13 16:40:19 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS0,9600)=0,打开端口(/dev/ttyS0,9600)成功!
2020-08-13 16:40:21 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:40:21 [信息] RPCutPaper(100,1)=0,msg=
2020-08-13 16:40:23 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:40:23 [信息] RPCutPaper(100,1)=0,msg=
2020-08-13 16:40:25 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:40:25 [信息] RPCutPaper(100,1)=0,msg=
2020-08-13 16:40:27 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:40:27 [信息] RPCutPaper(100,1)=0,msg=
2020-08-13 16:40:29 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:40:29 [信息] RPCutPaper(100,1)=0,msg=
2020-08-13 16:40:31 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:40:31 [信息] RPCutPaper(100,1)=0,msg=
2020-08-13 16:40:33 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:40:33 [信息] RPCutPaper(100,1)=0,msg=
2020-08-13 16:40:35 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:40:35 [信息] RPCutPaper(100,1)=0,msg=
2020-08-13 16:40:38 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 16:40:40 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 16:40:40 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:40:41 [信息] RPCutPaper(100,1)=0,msg=
2020-08-13 16:40:42 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:40:43 [信息] RPCutPaper(100,1)=0,msg=
2020-08-13 16:40:44 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:40:45 [信息] RPCutPaper(100,1)=0,msg=
2020-08-13 16:40:46 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:40:47 [信息] RPCutPaper(100,1)=0,msg=
2020-08-13 16:40:48 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:40:49 [信息] RPCutPaper(100,1)=0,msg=
2020-08-13 16:40:50 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:40:51 [信息] RPCutPaper(100,1)=0,msg=
2020-08-13 16:40:52 [信息] Device Loading!
2020-08-13 16:41:02 [调试] 创建驱动(100)成功!
2020-08-13 16:41:02 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 16:41:06 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:41:07 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:41:08 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:41:09 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:41:11 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:41:11 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:41:13 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 16:41:35 [信息] Device Loading!
2020-08-13 16:41:44 [调试] 创建驱动(100)成功!
2020-08-13 16:41:44 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 16:41:47 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:41:47 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:41:49 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:41:49 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:41:51 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:41:51 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:41:53 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:41:53 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:41:55 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:41:55 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:41:57 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:41:57 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:41:59 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:41:59 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:42:01 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:42:01 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:42:02 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 16:42:11 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS3,9600)=30001,打开端口(/dev/ttyS3,9600)失败!
2020-08-13 16:42:14 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=30004
2020-08-13 16:42:15 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:42:16 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=30004
2020-08-13 16:42:16 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:42:18 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=30004
2020-08-13 16:42:18 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:42:20 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=30004
2020-08-13 16:42:20 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:42:22 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=30004
2020-08-13 16:42:22 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:42:23 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=30004
2020-08-13 16:42:24 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:42:25 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=30004
2020-08-13 16:42:25 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:42:27 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=30004
2020-08-13 16:42:27 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:42:29 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=30004
2020-08-13 16:42:29 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:42:31 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=30004
2020-08-13 16:42:31 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:42:32 [信息] Device Loading!
2020-08-13 16:44:23 [信息] Device Loading!
2020-08-13 16:44:26 [调试] 创建驱动(100)成功!
2020-08-13 16:44:26 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 16:44:32 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:44:32 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:44:34 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:44:34 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:44:36 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:44:36 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:44:38 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:44:38 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:44:40 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:44:40 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:44:42 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:44:42 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:44:44 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:44:44 [信息] RPCutPaper(100,0)=30002,msg=
2020-08-13 16:47:31 [信息] Device Loading!
2020-08-13 16:47:36 [调试] 创建驱动(100)成功!
2020-08-13 16:47:36 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 16:47:43 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:47:43 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:47:48 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:47:48 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:47:50 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:47:50 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:49:05 [信息] Device Loading!
2020-08-13 16:49:09 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 16:49:13 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:49:13 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:49:19 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:49:19 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:49:21 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:49:21 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:49:23 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 16:49:23 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 16:49:25 [信息] Device Loading!
2020-08-13 16:59:58 [信息] Device Loading!
2020-08-13 17:00:03 [调试] 创建驱动(100)成功!
2020-08-13 17:00:03 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 17:00:03 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 17:00:07 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 17:00:08 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 17:00:08 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 17:00:08 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 17:00:15 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 17:00:18 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 17:00:20 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:00:20 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:00:22 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:00:22 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:00:24 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:00:24 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:02:11 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 17:02:14 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:02:14 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:02:20 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:02:20 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:02:22 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:02:22 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:02:23 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 17:02:26 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 17:02:28 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 17:02:31 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:02:31 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:02:32 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 17:03:54 [信息] Device Loading!
2020-08-13 17:03:58 [调试] 创建驱动(100)成功!
2020-08-13 17:03:58 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 17:04:01 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:04:01 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:06:36 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:06:36 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:06:42 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:06:42 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:08:05 [信息] Device Loading!
2020-08-13 17:08:11 [调试] 创建驱动(100)成功!
2020-08-13 17:08:11 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 17:08:18 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:08:18 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:08:24 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:08:24 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:08:37 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:08:37 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:08:58 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:08:58 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:09:00 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:09:00 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:09:02 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 17:09:03 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 17:09:06 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:09:06 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:09:10 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:09:11 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:09:20 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 17:09:25 [信息] Device Loading!
2020-08-13 17:09:34 [调试] 创建驱动(130)成功!
2020-08-13 17:09:35 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tlclient-1/libDRCurrencyITL.so,/dev/ttyS0,9600)=30005,/dev/ttyS0未检测到识币器！Code=31008,Read data timeout!
2020-08-13 17:09:35 [调试] 创建驱动(220)成功!
2020-08-13 17:09:35 [信息] OpenDevice(220,/data/app-lib/com.jsscom.tlclient-1/libDRReaderQRCode.so,/dev/ttyUSB0,115200)=30001,打开串口[/dev/ttyUSB0,115200]失败!
2020-08-13 17:09:35 [调试] 创建驱动(100)成功!
2020-08-13 17:09:35 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 17:09:36 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 17:09:37 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 17:09:45 [信息] Device Loading!
2020-08-13 17:09:48 [信息] Device Loading!
2020-08-13 17:09:58 [调试] 创建驱动(130)成功!
2020-08-13 17:09:59 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tlclient-1/libDRCurrencyITL.so,/dev/ttyS0,9600)=30005,/dev/ttyS0未检测到识币器！Code=31008,Read data timeout!
2020-08-13 17:09:59 [调试] 创建驱动(220)成功!
2020-08-13 17:09:59 [信息] OpenDevice(220,/data/app-lib/com.jsscom.tlclient-1/libDRReaderQRCode.so,/dev/ttyUSB0,115200)=30001,打开串口[/dev/ttyUSB0,115200]失败!
2020-08-13 17:09:59 [调试] 创建驱动(100)成功!
2020-08-13 17:09:59 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 17:10:00 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 17:10:01 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 17:10:01 [调试] 创建驱动(110)成功!
2020-08-13 17:10:01 [信息] OpenDevice(110,/data/app-lib/com.jsscom.tlclient-1/,,)=31005,Load /data/app-lib/com.jsscom.tlclient-1/ error!,dlopen failed: can't read file "/data/app-lib/com.jsscom.tlclient-1/": Is a directory
2020-08-13 17:10:01 [调试] 创建驱动(320)成功!
2020-08-13 17:10:01 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tlclient-1/,,)=31005,Load /data/app-lib/com.jsscom.tlclient-1/ error!,dlopen failed: can't read file "/data/app-lib/com.jsscom.tlclient-1/": Is a directory
2020-08-13 17:10:03 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 17:10:03 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tlclient-1/libDRCurrencyITL.so,/dev/ttyS0,9600)=0,端口已经打开!
2020-08-13 17:10:03 [调试] 创建驱动(910)成功!
2020-08-13 17:10:03 [信息] OpenDevice(910,/data/app-lib/com.jsscom.tlclient-1/libDRSQLite.so,/mnt/internal_sd/tl//data/js_tl.db,)=0,openDB=0
2020-08-13 17:10:04 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tlclient-1/,,)=31005,Load /data/app-lib/com.jsscom.tlclient-1/ error!,dlopen failed: can't read file "/data/app-lib/com.jsscom.tlclient-1/": Is a directory
2020-08-13 17:10:04 [错误] GetDeviceStatus(320)=31003,msg=驱动未加载
2020-08-13 17:10:12 [错误] GetDeviceStatus(130)=31008,msg=Read data timeout!
2020-08-13 17:10:30 [调试] CashDisable(130)=31008
2020-08-13 17:10:49 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 17:10:50 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 17:10:57 [错误] GetDeviceStatus(130)=31008,msg=Read data timeout!
2020-08-13 17:11:01 [调试] CashDisable(130)=31008
2020-08-13 17:11:02 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 17:11:03 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 17:11:24 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 17:11:25 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 17:11:41 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 17:11:42 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 17:11:57 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 17:12:00 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:12:00 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:12:10 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinterMS.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 17:12:13 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 17:12:22 [调试] PrintQrCode(100,3,1,http://www.jsscom.com)=0
2020-08-13 17:12:24 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 17:12:24 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 17:12:25 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 17:12:26 [调试] PrintQrCode(100,3,1,http://www.jsscom.com)=0
2020-08-13 17:12:27 [调试] PrintQrCode(100,3,1,http://www.jsscom.com)=0
2020-08-13 17:12:27 [调试] PrintQrCode(100,3,1,http://www.jsscom.com)=0
2020-08-13 17:12:28 [调试] PrintQrCode(100,3,1,http://www.jsscom.com)=0
2020-08-13 17:12:28 [调试] PrintQrCode(100,3,1,http://www.jsscom.com)=0
2020-08-13 17:12:28 [调试] PrintQrCode(100,3,1,http://www.jsscom.com)=0
2020-08-13 17:12:28 [调试] PrintQrCode(100,3,1,http://www.jsscom.com)=0
2020-08-13 17:12:29 [调试] PrintQrCode(100,3,1,http://www.jsscom.com)=0
2020-08-13 17:12:29 [调试] PrintQrCode(100,3,1,http://www.jsscom.com)=0
2020-08-13 17:12:29 [调试] PrintQrCode(100,3,1,http://www.jsscom.com)=0
2020-08-13 17:12:29 [调试] PrintQrCode(100,3,1,http://www.jsscom.com)=0
2020-08-13 17:12:30 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:12:37 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:12:37 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:12:47 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 17:25:06 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 17:25:07 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 17:25:08 [信息] CloseDevice(100)=31003,驱动未加载
2020-08-13 17:25:08 [信息] CloseDevice(100)=31003,驱动未加载
2020-08-13 17:25:10 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 17:25:10 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 17:25:12 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 17:25:19 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 17:25:20 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 17:25:22 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 17:25:26 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:25:26 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:25:33 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:25:34 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:25:35 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:25:36 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:25:37 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:25:38 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:25:38 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 17:25:39 [信息] CloseDevice(130)=0,Read data timeout!
2020-08-13 17:25:39 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:25:40 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:25:42 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:25:42 [信息] Device Loading!
2020-08-13 17:25:42 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:25:44 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 17:25:51 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 17:25:51 [信息] CloseDevice(100)=31003,驱动未加载
2020-08-13 17:25:52 [信息] CloseDevice(100)=31003,驱动未加载
2020-08-13 17:25:55 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 17:25:57 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:25:58 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:26:12 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:26:12 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:26:14 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 17:26:16 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 17:26:16 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 17:26:19 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:26:19 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:26:32 [信息] Device Loading!
2020-08-13 17:26:37 [信息] Device Loading!
2020-08-13 17:26:41 [信息] Device Loading!
2020-08-13 17:26:51 [调试] 创建驱动(130)成功!
2020-08-13 17:26:52 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tlclient-1/libDRCurrencyITL.so,/dev/ttyS0,9600)=30005,/dev/ttyS0未检测到识币器！Code=31008,Read data timeout!
2020-08-13 17:26:52 [调试] 创建驱动(220)成功!
2020-08-13 17:26:52 [信息] OpenDevice(220,/data/app-lib/com.jsscom.tlclient-1/libDRReaderQRCode.so,/dev/ttyUSB0,115200)=30001,打开串口[/dev/ttyUSB0,115200]失败!
2020-08-13 17:26:52 [调试] 创建驱动(100)成功!
2020-08-13 17:26:52 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 17:26:53 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 17:26:55 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 17:26:55 [调试] 创建驱动(110)成功!
2020-08-13 17:26:55 [信息] OpenDevice(110,/data/app-lib/com.jsscom.tlclient-1/,,)=31005,Load /data/app-lib/com.jsscom.tlclient-1/ error!,dlopen failed: can't read file "/data/app-lib/com.jsscom.tlclient-1/": Is a directory
2020-08-13 17:26:55 [调试] 创建驱动(320)成功!
2020-08-13 17:26:55 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tlclient-1/,,)=31005,Load /data/app-lib/com.jsscom.tlclient-1/ error!,dlopen failed: can't read file "/data/app-lib/com.jsscom.tlclient-1/": Is a directory
2020-08-13 17:26:56 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 17:26:56 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tlclient-1/libDRCurrencyITL.so,/dev/ttyS0,9600)=0,端口已经打开!
2020-08-13 17:26:57 [调试] 创建驱动(910)成功!
2020-08-13 17:26:57 [信息] OpenDevice(910,/data/app-lib/com.jsscom.tlclient-1/libDRSQLite.so,/mnt/internal_sd/tl//data/js_tl.db,)=0,openDB=0
2020-08-13 17:26:57 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tlclient-1/,,)=31005,Load /data/app-lib/com.jsscom.tlclient-1/ error!,dlopen failed: can't read file "/data/app-lib/com.jsscom.tlclient-1/": Is a directory
2020-08-13 17:26:57 [错误] GetDeviceStatus(320)=31003,msg=驱动未加载
2020-08-13 17:27:05 [错误] GetDeviceStatus(130)=31008,msg=Read data timeout!
2020-08-13 17:27:15 [调试] CashDisable(130)=31008
2020-08-13 17:27:20 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 17:27:21 [信息] CloseDevice(130)=0,Read data timeout!
2020-08-13 17:27:23 [信息] Device Loading!
2020-08-13 17:27:39 [信息] Device Loading!
2020-08-13 17:27:49 [调试] 创建驱动(130)成功!
2020-08-13 17:27:50 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tlclient-1/libDRCurrencyITL.so,/dev/ttyS0,9600)=30005,/dev/ttyS0未检测到识币器！Code=31008,Read data timeout!
2020-08-13 17:27:50 [调试] 创建驱动(220)成功!
2020-08-13 17:27:50 [信息] OpenDevice(220,/data/app-lib/com.jsscom.tlclient-1/libDRReaderQRCode.so,/dev/ttyUSB0,115200)=30001,打开串口[/dev/ttyUSB0,115200]失败!
2020-08-13 17:27:50 [调试] 创建驱动(100)成功!
2020-08-13 17:27:50 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 17:27:51 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 17:27:52 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 17:27:52 [调试] 创建驱动(110)成功!
2020-08-13 17:27:52 [信息] OpenDevice(110,/data/app-lib/com.jsscom.tlclient-1/,,)=31005,Load /data/app-lib/com.jsscom.tlclient-1/ error!,dlopen failed: can't read file "/data/app-lib/com.jsscom.tlclient-1/": Is a directory
2020-08-13 17:27:52 [调试] 创建驱动(320)成功!
2020-08-13 17:27:52 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tlclient-1/,,)=31005,Load /data/app-lib/com.jsscom.tlclient-1/ error!,dlopen failed: can't read file "/data/app-lib/com.jsscom.tlclient-1/": Is a directory
2020-08-13 17:27:54 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 17:27:54 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tlclient-1/libDRCurrencyITL.so,/dev/ttyS0,9600)=0,端口已经打开!
2020-08-13 17:27:54 [调试] 创建驱动(910)成功!
2020-08-13 17:27:54 [信息] OpenDevice(910,/data/app-lib/com.jsscom.tlclient-1/libDRSQLite.so,/mnt/internal_sd/tl//data/js_tl.db,)=0,openDB=0
2020-08-13 17:27:54 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tlclient-1/,,)=31005,Load /data/app-lib/com.jsscom.tlclient-1/ error!,dlopen failed: can't read file "/data/app-lib/com.jsscom.tlclient-1/": Is a directory
2020-08-13 17:27:54 [错误] GetDeviceStatus(320)=31003,msg=驱动未加载
2020-08-13 17:28:08 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 17:28:33 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 17:28:34 [信息] CloseDevice(130)=0,Read data timeout!
2020-08-13 17:28:38 [信息] Device Loading!
2020-08-13 17:28:48 [调试] 创建驱动(130)成功!
2020-08-13 17:28:49 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tlclient-1/libDRCurrencyITL.so,/dev/ttyS0,9600)=30005,/dev/ttyS0未检测到识币器！Code=31008,Read data timeout!
2020-08-13 17:28:49 [调试] 创建驱动(220)成功!
2020-08-13 17:28:49 [信息] OpenDevice(220,/data/app-lib/com.jsscom.tlclient-1/libDRReaderQRCode.so,/dev/ttyUSB0,115200)=30001,打开串口[/dev/ttyUSB0,115200]失败!
2020-08-13 17:28:49 [调试] 创建驱动(100)成功!
2020-08-13 17:28:49 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 17:28:51 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 17:28:51 [调试] 创建驱动(110)成功!
2020-08-13 17:28:51 [信息] OpenDevice(110,/data/app-lib/com.jsscom.tlclient-1/,,)=31005,Load /data/app-lib/com.jsscom.tlclient-1/ error!,dlopen failed: can't read file "/data/app-lib/com.jsscom.tlclient-1/": Is a directory
2020-08-13 17:28:52 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 17:28:52 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tlclient-1/libDRCurrencyITL.so,/dev/ttyS0,9600)=0,端口已经打开!
2020-08-13 17:28:52 [调试] 创建驱动(910)成功!
2020-08-13 17:28:52 [信息] OpenDevice(910,/data/app-lib/com.jsscom.tlclient-1/libDRSQLite.so,/mnt/internal_sd/tl//data/js_tl.db,)=0,openDB=0
2020-08-13 17:29:32 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 17:29:33 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 17:29:44 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 17:29:51 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 17:30:39 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 17:30:40 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 17:30:53 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 17:30:54 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 17:30:58 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 17:30:59 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 17:31:00 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 17:31:01 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 17:31:05 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 17:31:06 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 17:31:13 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 17:31:14 [信息] CloseDevice(130)=0,Read data timeout!
2020-08-13 17:33:36 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 17:33:39 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:33:39 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:33:53 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:33:53 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:34:05 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 17:34:07 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=31003
2020-08-13 17:34:07 [信息] RPCutPaper(100,0)=31003,msg=驱动未加载
2020-08-13 17:34:08 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 17:34:14 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:34:14 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:34:41 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 17:34:41 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 17:34:43 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 17:34:46 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 17:34:47 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 17:34:48 [错误] GetDeviceStatus(100)=31003,msg=驱动未加载
2020-08-13 17:34:49 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 17:35:08 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS0,9600)=0,端口已打开
2020-08-13 17:35:37 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS0,9600)=0,端口已打开
2020-08-13 17:35:38 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 17:35:39 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS0,9600)=0,打开端口(/dev/ttyS0,9600)成功!
2020-08-13 17:35:44 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 17:35:47 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:35:47 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:35:54 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 17:35:54 [信息] CloseDevice(100)=31003,驱动未加载
2020-08-13 17:35:54 [信息] CloseDevice(100)=31003,驱动未加载
2020-08-13 17:35:54 [信息] CloseDevice(100)=31003,驱动未加载
2020-08-13 17:35:55 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS0,9600)=0,打开端口(/dev/ttyS0,9600)成功!
2020-08-13 17:35:57 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:35:57 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:35:59 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:35:59 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:36:01 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:36:01 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:36:03 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:36:03 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:36:05 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:36:05 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:36:06 [信息] Device Loading!
2020-08-13 17:36:07 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:36:08 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:36:09 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:36:10 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:36:11 [信息] Device Loading!
2020-08-13 17:36:12 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:36:12 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:36:14 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:36:14 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:36:24 [信息] Device Loading!
2020-08-13 17:36:27 [调试] 创建驱动(100)成功!
2020-08-13 17:36:27 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS0,9600)=0,打开端口(/dev/ttyS0,9600)成功!
2020-08-13 17:36:30 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:36:30 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:37:22 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 17:37:24 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:37:24 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:37:30 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:37:30 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:37:32 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:37:32 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:37:34 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:37:34 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:37:35 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 17:37:36 [信息] Device Loading!
2020-08-13 17:37:39 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,端口已打开
2020-08-13 17:37:41 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 17:37:42 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS1,9600)=0,打开端口(/dev/ttyS1,9600)成功!
2020-08-13 17:37:44 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:37:44 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:38:28 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS0,9600)=0,端口已打开
2020-08-13 17:38:29 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 17:38:30 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS0,9600)=0,打开端口(/dev/ttyS0,9600)成功!
2020-08-13 17:38:32 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:38:32 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:39:01 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 17:39:02 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS0,9600)=0,打开端口(/dev/ttyS0,9600)成功!
2020-08-13 17:39:04 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 17:39:06 [信息] Device Loading!
2020-08-13 17:39:08 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS0,9600)=0,端口已打开
2020-08-13 17:39:10 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 17:39:10 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS0,9600)=0,打开端口(/dev/ttyS0,9600)成功!
2020-08-13 17:39:12 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:39:12 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:39:14 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:39:14 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:39:16 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:39:16 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:39:18 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:39:18 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:39:20 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:39:20 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:39:22 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:39:22 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:39:24 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:39:24 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:39:26 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:39:26 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:39:28 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:39:28 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:39:30 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:39:30 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:39:31 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 17:39:31 [信息] CloseDevice(100)=31003,驱动未加载
2020-08-13 17:39:31 [信息] CloseDevice(100)=31003,驱动未加载
2020-08-13 17:39:31 [信息] CloseDevice(100)=31003,驱动未加载
2020-08-13 17:39:32 [信息] CloseDevice(100)=31003,驱动未加载
2020-08-13 17:39:32 [信息] CloseDevice(100)=31003,驱动未加载
2020-08-13 17:39:32 [信息] CloseDevice(100)=31003,驱动未加载
2020-08-13 17:39:32 [信息] CloseDevice(100)=31003,驱动未加载
2020-08-13 17:39:32 [信息] CloseDevice(100)=31003,驱动未加载
2020-08-13 17:39:32 [信息] CloseDevice(100)=31003,驱动未加载
2020-08-13 17:39:32 [信息] CloseDevice(100)=31003,驱动未加载
2020-08-13 17:39:38 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tianlingtest-2/libReceiptPrinter.so,/dev/ttyS0,9600)=0,打开端口(/dev/ttyS0,9600)成功!
2020-08-13 17:39:40 [调试] PrintQrCode(100,7,1,http://www.jsscom.com)=0
2020-08-13 17:39:41 [信息] RPCutPaper(100,0)=0,msg=
2020-08-13 17:40:33 [信息] CloseDevice(100)=0,关闭端口成功
2020-08-13 17:40:35 [信息] Device Loading!
2020-08-13 17:40:46 [调试] 创建驱动(320)成功!
2020-08-13 17:40:46 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS0,115200)=30005,设备无响应[-1]
2020-08-13 17:40:47 [信息] CloseDevice(320)=0,端口未打开!
2020-08-13 17:40:48 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS0,115200)=30005,设备无响应[-1]
2020-08-13 17:40:49 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS0,115200)=30005,设备无响应[-1]
2020-08-13 17:40:49 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS0,115200)=30005,设备无响应[-1]
2020-08-13 17:40:58 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS0,115200)=30005,设备无响应[-1]
2020-08-13 17:40:59 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS0,115200)=30005,设备无响应[-1]
2020-08-13 17:40:59 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS0,115200)=30005,设备无响应[-1]
2020-08-13 17:41:00 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS0,115200)=30005,设备无响应[-1]
2020-08-13 17:41:00 [信息] CloseDevice(320)=0,端口未打开!
2020-08-13 17:41:01 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS0,115200)=30005,设备无响应[-1]
2020-08-13 17:41:01 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS0,115200)=30005,设备无响应[-1]
2020-08-13 17:41:01 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS0,115200)=30005,设备无响应[-1]
2020-08-13 17:41:01 [信息] CloseDevice(320)=0,端口未打开!
2020-08-13 17:41:02 [信息] CloseDevice(320)=31003,驱动未加载
2020-08-13 17:41:02 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS0,115200)=30005,设备无响应[-1]
2020-08-13 17:41:02 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS0,115200)=30005,设备无响应[-1]
2020-08-13 17:41:03 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS0,115200)=30005,设备无响应[-1]
2020-08-13 17:41:03 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS0,115200)=30005,设备无响应[-1]
2020-08-13 17:41:03 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS0,115200)=30005,设备无响应[-1]
2020-08-13 17:41:03 [信息] CloseDevice(320)=0,端口未打开!
2020-08-13 17:41:04 [信息] CloseDevice(320)=31003,驱动未加载
2020-08-13 17:41:04 [信息] CloseDevice(320)=31003,驱动未加载
2020-08-13 17:41:04 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS0,115200)=30005,设备无响应[-1]
2020-08-13 17:41:04 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS0,115200)=30005,设备无响应[-1]
2020-08-13 17:41:05 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS0,115200)=30005,设备无响应[-1]
2020-08-13 17:41:05 [信息] CloseDevice(320)=0,端口未打开!
2020-08-13 17:41:05 [信息] CloseDevice(320)=31003,驱动未加载
2020-08-13 17:41:06 [信息] CloseDevice(320)=31003,驱动未加载
2020-08-13 17:41:06 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS0,115200)=30005,设备无响应[-1]
2020-08-13 17:41:06 [信息] CloseDevice(320)=0,端口未打开!
2020-08-13 17:41:06 [信息] CloseDevice(320)=31003,驱动未加载
2020-08-13 17:41:07 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS0,115200)=30005,设备无响应[-1]
2020-08-13 17:41:07 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS0,115200)=30005,设备无响应[-1]
2020-08-13 17:41:07 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS0,115200)=30005,设备无响应[-1]
2020-08-13 17:41:07 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS0,115200)=30005,设备无响应[-1]
2020-08-13 17:41:09 [信息] Device Loading!
2020-08-13 17:41:11 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS0,115200)=30005,设备无响应[-1]
2020-08-13 17:41:12 [信息] CloseDevice(320)=0,端口未打开!
2020-08-13 17:41:13 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS0,115200)=30005,设备无响应[-1]
2020-08-13 17:41:14 [信息] CloseDevice(320)=0,端口未打开!
2020-08-13 17:41:53 [信息] Device Loading!
2020-08-13 17:41:56 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS0,115200)=30005,设备无响应[-1]
2020-08-13 17:41:57 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS0,115200)=30005,设备无响应[-1]
2020-08-13 17:41:58 [信息] CloseDevice(320)=0,端口未打开!
2020-08-13 17:41:58 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS0,115200)=30005,设备无响应[-1]
2020-08-13 17:41:59 [信息] CloseDevice(320)=0,端口未打开!
2020-08-13 17:42:04 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS1,115200)=0,Ver:20200324.20
2020-08-13 17:42:17 [信息] CloseDevice(320)=0,关闭端口成功!
2020-08-13 17:42:43 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS2,115200)=30001,打开端口(/dev/ttyS2,115200)失败!
2020-08-13 17:42:50 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS3,115200)=30001,打开端口(/dev/ttyS3,115200)失败!
2020-08-13 17:42:57 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS0,115200)=30005,设备无响应[-1]
2020-08-13 17:43:08 [信息] CloseDevice(320)=0,端口未打开!
2020-08-13 17:43:08 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS0,115200)=30005,设备无响应[-1]
2020-08-13 17:43:09 [信息] CloseDevice(320)=0,端口未打开!
2020-08-13 17:43:10 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS0,115200)=30005,设备无响应[-1]
2020-08-13 17:43:20 [信息] CloseDevice(320)=0,端口未打开!
2020-08-13 17:43:21 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS0,115200)=30005,设备无响应[-1]
2020-08-13 17:43:21 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS0,115200)=30005,设备无响应[-1]
2020-08-13 17:43:26 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS3,115200)=30001,打开端口(/dev/ttyS3,115200)失败!
2020-08-13 17:43:27 [信息] CloseDevice(320)=0,端口未打开!
2020-08-13 17:43:27 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS3,115200)=30001,打开端口(/dev/ttyS3,115200)失败!
2020-08-13 17:43:32 [信息] CloseDevice(320)=0,端口未打开!
2020-08-13 17:43:32 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS4,115200)=30001,打开端口(/dev/ttyS4,115200)失败!
2020-08-13 17:43:32 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS4,115200)=30001,打开端口(/dev/ttyS4,115200)失败!
2020-08-13 17:43:36 [信息] CloseDevice(320)=0,端口未打开!
2020-08-13 17:43:37 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyS5,115200)=30001,打开端口(/dev/ttyS5,115200)失败!
2020-08-13 17:43:41 [信息] CloseDevice(320)=0,端口未打开!
2020-08-13 17:43:42 [信息] OpenDevice(320,/data/app-lib/com.jsscom.tianlingtest-2/libDRLedLight.so,/dev/ttyUSB0,115200)=30001,打开端口(/dev/ttyUSB0,115200)失败!
2020-08-13 17:45:48 [信息] Device Loading!
2020-08-13 17:47:07 [信息] Device Loading!
2020-08-13 17:47:21 [信息] Device Loading!
2020-08-13 17:49:04 [信息] Device Loading!
2020-08-13 17:49:29 [信息] Device Loading!
2020-08-13 17:49:41 [调试] 创建驱动(130)成功!
2020-08-13 17:49:42 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tlclient-1/libDRCurrencyITL.so,/dev/ttyS0,9600)=30005,/dev/ttyS0未检测到识币器！Code=31008,Read data timeout!
2020-08-13 17:49:42 [调试] 创建驱动(220)成功!
2020-08-13 17:49:42 [信息] OpenDevice(220,/data/app-lib/com.jsscom.tlclient-1/libDRReaderQRCode.so,/dev/ttyUSB0,115200)=30001,打开串口[/dev/ttyUSB0,115200]失败!
2020-08-13 17:49:42 [调试] 创建驱动(100)成功!
2020-08-13 17:49:42 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS0,9600)=0,打开端口(/dev/ttyS0,9600)成功!
2020-08-13 17:49:42 [错误] GetDeviceStatus(100)=30053,msg=打印机抬杠打开[FF]
2020-08-13 17:49:43 [错误] GetDeviceStatus(100)=31000,msg=打印机无响应
2020-08-13 17:49:43 [调试] 创建驱动(110)成功!
2020-08-13 17:49:43 [信息] OpenDevice(110,/data/app-lib/com.jsscom.tlclient-1/,,)=31005,Load /data/app-lib/com.jsscom.tlclient-1/ error!,dlopen failed: can't read file "/data/app-lib/com.jsscom.tlclient-1/": Is a directory
2020-08-13 17:49:44 [信息] OpenDevice(100,/data/app-lib/com.jsscom.tlclient-1/libReceiptPrinter.so,/dev/ttyS0,9600)=0,端口已打开
2020-08-13 17:49:44 [信息] OpenDevice(130,/data/app-lib/com.jsscom.tlclient-1/libDRCurrencyITL.so,/dev/ttyS0,9600)=0,端口已经打开!
2020-08-13 17:49:44 [调试] 创建驱动(910)成功!
2020-08-13 17:49:44 [信息] OpenDevice(910,/data/app-lib/com.jsscom.tlclient-1/libDRSQLite.so,/mnt/internal_sd/tl//data/js_tl.db,)=0,openDB=0